Robin - One piece hueforge

The dimensions are 240mm x 137.32mm (you can scale it down if you want, but keep the Z to 2mm)A follow would help a lot! <3 Thank you! Layer height 0.08mm (extra fine)Initial layer height 0.16.Sparse infill density 100%, rectilinear. You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.3 #5e43b7 PLA BambuLab Purple Transmission Distance: 5 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 6.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Purple At layer #12 (1.04mm) swap to Pink At layer #15 (1.28mm) swap to Jade White for the rest.