Thingiverse
Roblox Noob Moveable
by Pete1952
5
Downloads
11
Likes
0
Makes
I couldn't find a moveable Noob so I thought that I would make one and share it.
The overall height is about 100mm and can be printed in either PLA, PETG or ABS.
The minimum infill is shown as 25% but the choice is yours, whatever you can get away with.
I have used separate pins for the Arms and Head, partly because I wanted stronger pins and also because I found that when the pins were incorporated in the model, the fan was needed to cool them and stop them deforming. It was therefore easier to print them separately.
The overall height is about 100mm and can be printed in either PLA, PETG or ABS.
The minimum infill is shown as 25% but the choice is yours, whatever you can get away with.
I have used separate pins for the Arms and Head, partly because I wanted stronger pins and also because I found that when the pins were incorporated in the model, the fan was needed to cool them and stop them deforming. It was therefore easier to print them separately.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
