Thingiverse
RoboRally inspired Twonky
2
Downloads
0
Likes
0
Makes
Twonky inspired robot.
If you print this while it is still marked as a work in progress, be warned about a couple of things.
1) The pegs are a VERY tight fit. It might be worth printing them at about 98% of the rest of the files.
2) I need to re-export the eyes file. The left eye is not sitting flush with the other eye so it's not attached to the baseplate. These are pretty small, so you should be able to print with support and get it to print.
I printed the face plate in glow in the dark filament. It also required a bit of sanding to fit, but I didn't need to reprint.
If you print this while it is still marked as a work in progress, be warned about a couple of things.
1) The pegs are a VERY tight fit. It might be worth printing them at about 98% of the rest of the files.
2) I need to re-export the eyes file. The left eye is not sitting flush with the other eye so it's not attached to the baseplate. These are pretty small, so you should be able to print with support and get it to print.
I printed the face plate in glow in the dark filament. It also required a bit of sanding to fit, but I didn't need to reprint.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!