Thingiverse
Robot B9 (Lost in Space)
door 134B29F
68
Downloads
106
Likes
0
Makes
The robot from the early series of Lost in Space Never had a real name,
but was just known as robot
I have added a blend file that as all the separate parts for your manipulation and printing,
the stl files provided should allow you to print them in larger sections
1 CTB file for a elegoo printer to print a 140mm robot
a couple of issues with the print, don't print the body too close to the bed,
the legs seem to of gained a membrane on the inside, will just need removing
ensure the arms are well supported
I had a small lift on one side of one of the arms
Luckily not to detrimental
a little sandpaper may be needed to thin the claw bases to fit the slots in the arms
a new added body option with reinforced front plate, a base plate to aid adhesion for printing without supports, also a drain hole to help, and separate top
but was just known as robot
I have added a blend file that as all the separate parts for your manipulation and printing,
the stl files provided should allow you to print them in larger sections
1 CTB file for a elegoo printer to print a 140mm robot
a couple of issues with the print, don't print the body too close to the bed,
the legs seem to of gained a membrane on the inside, will just need removing
ensure the arms are well supported
I had a small lift on one side of one of the arms
Luckily not to detrimental
a little sandpaper may be needed to thin the claw bases to fit the slots in the arms
a new added body option with reinforced front plate, a base plate to aid adhesion for printing without supports, also a drain hole to help, and separate top
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!