Thingiverse
Robot Love - Magnet / Keyring
door C47_3D
7
Downloads
7
Likes
0
Makes
Robot Love
For Fridge magnet or Keyring (second model).
Model for Keyring is thicker. You can lower it on Z axis for 1,6mm if you want the same thickness as normal model (like for example if you want it for a magnet).
Models optimised for 0.4mm nozzle.
Best looking (in my opinion) with up/down infill lines on front.
If you want an effect like on photo with two colours just change the filament before 5th layer (or 12th on keyring) - if you are using 0,2mm layer height.
If you will miss it you can still change it little later but at least two top layers should be with same, new colour.
For Fridge magnet or Keyring (second model).
Model for Keyring is thicker. You can lower it on Z axis for 1,6mm if you want the same thickness as normal model (like for example if you want it for a magnet).
Models optimised for 0.4mm nozzle.
Best looking (in my opinion) with up/down infill lines on front.
If you want an effect like on photo with two colours just change the filament before 5th layer (or 12th on keyring) - if you are using 0,2mm layer height.
If you will miss it you can still change it little later but at least two top layers should be with same, new colour.
C47_3D publiceert ook op
66 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!