Robot R1 – Modular Mechs/Robots

I wanted to develop a mecha that could be expanded as desired. That's why I designed all the joints so that they always have whole millimeter measurements (i.e., 3, 4, 7 and 9 mm).So if you want to design your own weapons or modules, all you have to do is measure how many millimeters the cylinder measures at the end. Then you can add such a cylinder to your module, and it will be compatible with the robot.Please share your designs so that others can benefit from them too, and so that eventually it will be easy to print your own CUSTOM robot. Only a little support is needed, but carefully nibble at the ends of the joints.For the “Arm Left,” you need to brake it in with some force so that the straight part is on top. The printing time is only about 1 hour and 30 minutes, and approximately 16 grams of material are used.If you position the parts yourself, copy the positioning of the images, as otherwise the parts often do not fit or do not look good. I plan to release additional module