Rocker Switch Housing

This is a Rocker Switch Holder/Housing. I made it for only 1 Rocker Switch but let me know if you want it with more switch's on it. It uses NO SUPPROTS! The only assembly you will have to do is putting the switch into the housing. The switch is a tight fit, so you wont have to worry about it sinning around. there it a 10mm hole in the back so you can run wires through. Main switch hole it 20.80mm round for a tight fit. The entire assembly is 54mm long, and 27mm wide and tall. Step 1: Print the HousingStep 2: Run the wires through the 10mm holeStep 3: Attach wires to the round rocker switchStep 4: Push the switch into the sousing The way I mounted it was just using 3M double sided strips and put them on the side and attached the housing to a spot on my desk, but you can mount it wherever you want. Once you print it please tell me how it went. Thank YouBoost MeGive me a BOOST for FREE