Rocket And Groot HF

Project: Rocket and Groot.hfpPrint at 100% infill with a layer height of 0.06mm with a base layer of 0.16mmThe Model is 244.1x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.46mmThe Max Depth is 2.3mm and the Actual Depth is 2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Bambu Labs Cocao Brown Transmission Distance: 5 PLA Bambu Labs Basic Bronze Transmission Distance: 3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA Bambu Labs Basic Cyan Transmission Distance: 3.7 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Desert Tan Transmission Distance: 5 PLA PolyLite White Transmission Distance: 5This print uses 10 unique filamentsSwap Instructions: Start with Black At layer #10 (0.7mm) swap to Cocao Brown At layer #13 (0.88mm) swap to Bronze At layer #14 (0.94mm) swap to Dark Blue At layer #15 (1mm) swap t