Thingiverse
Rocket lamp
par drzymala
463
Téléchargements
363
Likes
4
Makes
IMPORTANT NOTICE
- Please use max 5W lightbulbs (e.g. LED) or it might melt and cause fire.
- Do not use hot glue, use cyanoacrylates (a.k.a. super glue).
- First print the "tip.stl" file to see if your settings are right for the task.
You will need to adapt the "lamp_clamp.stl" model to match your lightbulb. The fins are glued to the chassis and the rest is held together by the exhaust screws. If the tip of the rocket won't turn out well, then print just the tip and glue it back atop.
- Please use max 5W lightbulbs (e.g. LED) or it might melt and cause fire.
- Do not use hot glue, use cyanoacrylates (a.k.a. super glue).
- First print the "tip.stl" file to see if your settings are right for the task.
You will need to adapt the "lamp_clamp.stl" model to match your lightbulb. The fins are glued to the chassis and the rest is held together by the exhaust screws. If the tip of the rocket won't turn out well, then print just the tip and glue it back atop.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
