Thingiverse
Rocket Rescuer
by Nv7_Things
2
Downloads
3
Likes
0
Makes
See it in action [on YouTube](https://youtube.com/shorts/CF2rBnLuWcQ?si=bemd7hzgLfybZed7)!
This is a screw on attachment for taking rockets out of trees. I used it on the Home Depot [25 foot Unger telescoping pole](https://www.homedepot.com/p/Unger-24-ft-Aluminum-Telescoping-Pole-with-Connect-and-Clean-Locking-Cone-and-Quick-Flip-Clamps-972980/313314116), but I believe it is compatible with other telescoping poles as well.
No supports necessary! Just print it in the orientation shown in the picture of the slicer, screw the threads onto your pole, and use two M3x25mm screws to fasten the attachment on! Feel free to print your own attachments too.
You can use it by putting it under the parachute and then spinning it in to pull the rocket out of any branches.
This is a screw on attachment for taking rockets out of trees. I used it on the Home Depot [25 foot Unger telescoping pole](https://www.homedepot.com/p/Unger-24-ft-Aluminum-Telescoping-Pole-with-Connect-and-Clean-Locking-Cone-and-Quick-Flip-Clamps-972980/313314116), but I believe it is compatible with other telescoping poles as well.
No supports necessary! Just print it in the orientation shown in the picture of the slicer, screw the threads onto your pole, and use two M3x25mm screws to fasten the attachment on! Feel free to print your own attachments too.
You can use it by putting it under the parachute and then spinning it in to pull the rocket out of any branches.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
