Slicer Discord
rocket stove – 3D printable model from GrabCAD GrabCAD
STEP / IGES

rocket stove

242 Downloads
44 Likes
0 Makes
Go to Model
This heavy-duty, vertical wood-burning stove—fundamentally different from a rocket stove—incorporates a meticulously calibrated secondary-air system that virtually eliminates chimney emissions. The entire unit is fully welded into one seamless piece, weighing 130 kg and built as a single monobloc; it rolls on three swivel casters equipped with foot brakes, so once you push it to the desired spot a single step locks it firmly in place. Critical sections of the shell are fabricated from 15 mm and 10 mm thick steel plate, giving the stove a service life of more than thirty years under normal use. Whether you need space heating or full-scale cooking, it handles both with ease: even a 600 mm pot filled to the brim with water will not tip it, thanks to its deliberately low center of gravity. The exterior has been shot-blasted and then coated with an 800 °C heat-resistant finish, while inside the firebox you can roast sweet potatoes, corn, or beef—or simply keep a kettle of tea warm. The stove operates on natural draft and is ideally suited to rural and small-town homes; if installed in an urban apartment, make sure the chosen area is very well ventilated.
Category
STEP / IGES
Source
GrabCAD
Published
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STEP, STL
Material
PLA, Wood PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection