Slicer Discord
Rocking Footrest – 3D-printbaar model van MakerWorld MakerWorld
Office

Rocking Footrest

door Johnny Ow · Office
19 Downloads
10 Likes
5 Makes
Model downloaden
This is a rocking footrest made with real wooden dowels. You can lay it flat and use it as a traditional footrest, or flip it upside down which allows it to rock slightly when you shift your seating position. Print the legs in your favorite PLA and then attach ½" dowels with glue; the holes are slightly larger than 13mm because wood is not exact. You will need 24 dowels of whatever size you desire (16-18" is good).I suggest test fitting before applying glue. It will be easier to assemble if you put glue in all the leg holes and insert one dowel half way into both legs. Repeat until all dowels are seated half way in both legs. It is nearly impossible to put all the dowels into one leg and then try to fit them all into the other leg at the same time.I printed mine in wood PLA and finished off the whole thing with wood glue and a coat of danish oil, and it's been rockin'! There is also a fully printed version.Wood PLA1/2" Wooden DowelsDanish Oil
Categorie
Office
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, Wood PLA
Nabewerking
Lijmen
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie