Rolling spool storage cart

MembershipNew rolling filament storage cart. Made for these wheels that haven't arrived yet https://amzn.to/4jU47KM I made some quick adapters to use some old wheels i had off and old computer chair. you can do the same if you don't want to use the wheels its designed for. pretty straight forward print. i used petg with pla support interface. you may and i recommend you adjust your support setting to what works for you. it uses ¾ round dowel rod. Pictured is 2 ft lengths. outside screw holes are countersunk for a drywall or decking screw. i pre drilled the end of the rods with an eighth drill bit to prevent the rod from splitting. the sections slide together with a dovetail grove. can be as tall as you want with multiple center sections. fitment is tight. all my filament is calibrated for optimal flow. so, if you have any amount of over extrusion your joints may be a little tight. you can remedy this by Utilizing horizontal expansion. Enjoy and please share you projects!