Thingiverse
Rolling Stick Thingie 2
por Thomllama
141
Descargas
80
Likes
1
Makes
Slight mods to the rolling stick thingie.
Modded the end caps, tad shorter. made it so an M8 nut can be installed as the weight and is hidden inside. can stack 2 or 3 nuts if desired.
best results-
- **print end caps solid, 100%infill using a flex filament ** - *(can use regular filaments but will need to put a soft pad something on the end after)*
- **print center in what ever plastic you want, but needs to be around 4 shells, with 4-6 top bottom layers with ZERO infill...**
• Older version that uses M5 bolt instead of nuts for end cap weight - http://www.thingiverse.com/thing:2181678 •
https://youtu.be/cCFN-NiJqsM
Modded the end caps, tad shorter. made it so an M8 nut can be installed as the weight and is hidden inside. can stack 2 or 3 nuts if desired.
best results-
- **print end caps solid, 100%infill using a flex filament ** - *(can use regular filaments but will need to put a soft pad something on the end after)*
- **print center in what ever plastic you want, but needs to be around 4 shells, with 4-6 top bottom layers with ZERO infill...**
• Older version that uses M5 bolt instead of nuts for end cap weight - http://www.thingiverse.com/thing:2181678 •
https://youtu.be/cCFN-NiJqsM
Thomllama también publica en
154 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
