Roman Battle Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 225x156.04mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Brown Transmission Distance: 0.8 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA Overture Yellow Transmission Distance: 9.7 PLA SILLK Eryone Silk Gold Transmission Distance: 5 PLA SILK Eryone Silver Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filaments Start with Black At layer #10 (0.88mm) swap to Brown At layer #12 (1.04mm) swap to Blue Gray At layer #15 (1.28mm) swap to Dark Red At layer #18 (1.52mm) swap to Yellow At layer #19 (1.6mm) swap to Silk Gold At layer #21 (1.76mm) swap to Silver At layer #25 (2.08mm) swap to Jade White for the rest. This is my next h