Ron bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x150mm in size. You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 1.68mm and the Actual Thickness is 1.68mm.Filaments Used:PLA ******** Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA ****** Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #12 (1.04mm) swap to White for the rest.