Rooftop Revenant

“Perched in silence above the city’s decay, the Rooftop Revenant watches… and waits.”Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 0.8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Blue Gray At layer #17 (1.44mm) swap to Gray At layer #19 (1.6mm) swap to Jade White for the rest.