Thingiverse
Root 3 Lite DXF with drill marks
par bloodymx
56
Téléchargements
50
Likes
0
Makes
UPDATE:
Due to request, I've added a printable PDF file with height reference.
___
UPDATE:
I finally found time to setup my laser and engrave the DXF onto a test piece. I used a 4 / 9 mm drillbit and 20 / 25 mm forstner bits to drill the holes. The outer perimeter was cut on my bandsaw. Havent checked the fitting yet, but it looks alright.
____
This is a DXF file (to scale) of the X gantry side panel for the Root3Lite (dated 25.12.2017).
Comes with drill markings if you want to fabricate it by hand.
Note that this file is currently untested - I will try to replicate it on my laser engraver after the holidays.
Due to request, I've added a printable PDF file with height reference.
___
UPDATE:
I finally found time to setup my laser and engrave the DXF onto a test piece. I used a 4 / 9 mm drillbit and 20 / 25 mm forstner bits to drill the holes. The outer perimeter was cut on my bandsaw. Havent checked the fitting yet, but it looks alright.
____
This is a DXF file (to scale) of the X gantry side panel for the Root3Lite (dated 25.12.2017).
Comes with drill markings if you want to fabricate it by hand.
Note that this file is currently untested - I will try to replicate it on my laser engraver after the holidays.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !