Root Bound - Hueforge Print

This is a 160mm x 240mm sized print, completed in approximately 4 hours. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA+ Sunlu Dark Gold (Dark Brown) Transmission Distance: 1.8 PLA+ Sunlu Coffee Transmission Distance: 3 PLA Kingroon White Transmission Distance: 8Swap Instructions: Start with Black At layer #8 (0.76mm) swap to Dark Gold (dark Brown) At layer #11 (1mm) swap to Coffee At layer #14 (1.24