Roses

Project: RosePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x137.29mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Paramount 3D Harajuka Pink Transmission Distance: 5.5 PLA BambuLab Basic Pink Transmission Distance: 8 PETG JAYO White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Harajuka Pink At layer #12 (1.04mm) swap to Pink At layer #17 (1.44mm) swap to White for the rest.