Rostock MAX Tower Alignment Clamps

If you've ever thought, "Gee, these towers would be a lot easier to align if I had several more arms," this is for you! Once installed, it will pull the towers as close to the center of the bed as possible. Friction keeps the towers from moving up or down, and will greatly reduce the tendency of each tower to "walk" as you torque down the T-slot nuts.

**NOTE: I've since switched to using band clamps.** They're more expensive, but also a lot easier to use, and you can have them ready _before_ your printer is assembled: http://www.amazon.com/gp/product/B0000DD1P8/ref=wms_ohs_product?ie=UTF8&psc=1

Otherwise, read on!

I got the original idea from someone else on the SeeMeCNC forums. I forgot his name. (If that was you, let me know and I'll credit you here.)

I have a backburner project to adapt these clamps so that the threaded rods sit completely outside the build volume, so they can be left mounted permanently. This is not just good for keeping it aligned - it will also make t