Slicer Discord
Rotary Dice! – 3D-printbaar model van MakerWorld MakerWorld
Other Toys & Games

Rotary Dice!

37 Downloads
16 Likes
25 Makes
Model downloaden
The Rotary Dice!!This is the rotary dice to replace boardgame D-6 dice! It uses magnets for feedback and to key in the position of the faces. It is a great fidget too! I am currently working on a few model iterations that use different size magnets for different levels of feedback! I will post those here. I will also be creating multiple bases so that multiple of these rotary dice can be connected together. Assembly Instructions:Insert the bearing into the rotary wheel (part 1) until it is flush against the wallUse super glue to install the magnets into the 7 holes. Remember to make sure the magnets on the wheel all face the same direction. The magnet on the base (part 2) should attract the magnets on the wheel.Slide the rotary wheel (part 1) onto the shaft of the base (part 2) with the magnets facing the magnet in the base.Place part 3 into place and run a few test spinsIf no adjustments on the fit are needed, add a tiny dab of super glue to the edge of the bearing to tack it in place
Categorie
Other Toys & Games
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
uitgebreide nabewerking
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 2/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Nabewerking
Lijmen, Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Brandochili publiceert ook op

8 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

2 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie