Thingiverse
Rotary Tattoo Machine
von BodeyM
93
Downloads
120
Likes
0
Makes
MAKING AND USING YOUR OWN TATTOO MACHINE ON A HUMAN WITHOUT PROPER TRAINING AND APPRENTICESHIP IS DUMB. DON'T DO IT.
================================================
Screws required:
----------------------
- 2x - M3-0.5 x 6 - Motor mount
- 1x - M3 x 20 - Tube vise
- 1x - [M3 Thumb Nut](https://www.aliexpress.com/item/10Pcs-M3-Knurled-Thumb-Nut-w-Collar-Screw-Spacer-Washer-Aluminum-Alloy-Multicolor-For-FPV-RC/32907128674.html) - Tube vise
- 1x - M3 Lock washer
Extra parts needed:
--------------------------
- [Motor](https://www.aliexpress.com/item/Brand-new-and-original-Mabuchi-370-DC-motor-RK-370CC-14230-12-30V-20700RPM/32638342710.html) - This is the best one I've found so far. You will need to trim a few millimeters off the output shaft with a dremel cutoff wheel or something to get the cam wheel to sit against the motor and line up correctly. I used some duct tape to wrap the motor, but that's up to you.
- [Tattoo cartridge grip](https://www.aliexpress.com/item/Alumin
================================================
Screws required:
----------------------
- 2x - M3-0.5 x 6 - Motor mount
- 1x - M3 x 20 - Tube vise
- 1x - [M3 Thumb Nut](https://www.aliexpress.com/item/10Pcs-M3-Knurled-Thumb-Nut-w-Collar-Screw-Spacer-Washer-Aluminum-Alloy-Multicolor-For-FPV-RC/32907128674.html) - Tube vise
- 1x - M3 Lock washer
Extra parts needed:
--------------------------
- [Motor](https://www.aliexpress.com/item/Brand-new-and-original-Mabuchi-370-DC-motor-RK-370CC-14230-12-30V-20700RPM/32638342710.html) - This is the best one I've found so far. You will need to trim a few millimeters off the output shaft with a dremel cutoff wheel or something to get the cam wheel to sit against the motor and line up correctly. I used some duct tape to wrap the motor, but that's up to you.
- [Tattoo cartridge grip](https://www.aliexpress.com/item/Alumin
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!