Rotating Brackets

Rotating Brackets-

Here are 4 Different Rotating Brackets in there Printing Positions-

50-Degree ( Rear-end Bolt)
90-Degree
90- Degree (Rear-end Bolt )
115-Degree

Each Bracket has about 3-Degree Overshoot,,,more if using Low Profile Bolt Heads,

There are Slight Changes to each Bracket to suit different situations and all use 5mm Holes for M5 Bolts- use 25mm or 1-Inch to Join them together and 10mm or 12mm Bolts for connecting to the T-Slot-

There designed to be as Strong as Possible in their current printing Position so don’t Re-Orientate them ( I’ve paired them together so you don’t make that mistake like i did,,, )

Their is a very slight amount of Flex with the Brackets that don't have a Rear End Bolt- this isn't really a problem,,,,,, but worth mentioning,,,, it can be removed by Glue or epoxy

For a Permeant Fix in Rotation Degrees just add Glue to the Rotation Arms Faces and set in the required position, o