Rotating Earth lamp

Based on Legolor's Earth Litophane Lamp file 'earth14_8in__FINAL__cut.stl' (https://www.thingiverse.com/thing:4578198), added a bottom ring and put all together on rotating base. I found spare 6V DC motor with reductor and fix it on base at position where 'gear' part (mounted on reductor's shaft - cca. 100 RPM) drives 'base_rotor' part. Any low speed motor can be used as long it fits inside base. Switch (20 mm) is used to turn motor on/off when power is applied, but just as an option - if you don't use it, motor will be turned on/off together with lamp. If you don't use switch just print 'base_upper_no_switch' part instead of 'base_upper'. Lamp socket is standard E14 (2.6 x 5.6 cm) with thread at bottom and I use E14 4.9W RGBW light bulb.All part are printed without supports, 0.2 mm layer height, PLA (black and white) and PLA Silk (orange).Preview: https://youtube.com/shorts/vwgqicwQLzc?feature=shareParts needed:M4 screws - 8xBall Bearing 6000-C-2Z - 1xSwitch 20 mm - 1x (optional)Low speed motor (up to 100 RPM)E14 RGB lamp E14 lamp socketwires