Rotating Mechanism #4

Hey Everyone!I promise to design other models soon!! I just really like the challenge of these movements. This one takes a bit longer to print, but worth it in my opinion. Assembly is easier than #3 (part of the design challenge) Please read the assembly instructions at the bottom of this page I hope you enjoy the model! Print Dimensions:165 mm W X 145 mm D X 175 mm H Print Specifications:PLA0.4 mm nozzle 0.2 layer height2 wall loops15-45% infillsupports where needed Supplies:1 - 18mm x 1mm x 30 mm compression springAmazon link:https://www.amazon.com/gp/product/B0913B3TVP/ref=ox_sc_saved_image_1?smid=A1THAZDOWP300U&th=1 Assembly Instructions:Assembly is straight forward, i have included photos in the order i used. There are only a couple special details to save you from potential frustration. First test fit all the sliding pieces together, you may need to lightly sand the top contact surface of the friction dogs where the supports are (plate 1). Be careful removing the support material