Rotating telehandler

This is my Rotating telehandler model, it is modeled in 1/64th scale and is semi compatible with my previous telehandler models. It prints in 2 plates, plate one should be done in black and plate 2 I did in green but can be done in any color, i used Pla. The model extends to about 300mm, it will tip over past 100mm in most positions without outriggers. The model rotates a full 360 and is secured to the base with a m3x8mm screw. The model requires 4 M4x12 screws, 1 m3x8 screw, 1 m3x16 screw with nut, and 1 m2x16 screw with nut. The attachments are the same mounting as my earlier telehandler and can be used interchangeably between all models. the tires, mounting plate and boom mount are all the same allowing for customizability, Yes the big boom will fit on the other telehandlers. The cab is technically interchangable, but does have extra geometry that stops the cylinder from falling out, so keep that in mind if swapping cabs.Have fun lifting and merry Printmas Boost Meplease boost me if