Electronics
Go to Model
Rotating TurnTable ESP32-WIFI-WEB interface (28cm diameter)
46
Downloads
47
Likes
0
Makes
First of all: this is a remake of the amazing: https://www.thingiverse.com/thing:4817279
I made the following changes:
- the table now is bigger : 28 cm of diameter
- I used an ESP32 with WIFI
- I made it an Access Point
- you can access via AP and change: direction and speed
- the switch is round
- it is all fully enclosed with 18650 batteries that can be extracted and changes
I know it is overkill using esp32, but it was there around doing nothing. the ESP has also a display which I am not using.
You can find also the *.ino file and the html.h one.
I am not very good in HTML5 and css so if you can get it better let me know that I will update it.
here you can find it on GitHub: https://github.com/Blu-Eagle/turntable-wifi-esp32
I made the following changes:
- the table now is bigger : 28 cm of diameter
- I used an ESP32 with WIFI
- I made it an Access Point
- you can access via AP and change: direction and speed
- the switch is round
- it is all fully enclosed with 18650 batteries that can be extracted and changes
I know it is overkill using esp32, but it was there around doing nothing. the ESP has also a display which I am not using.
You can find also the *.ino file and the html.h one.
I am not very good in HTML5 and css so if you can get it better let me know that I will update it.
here you can find it on GitHub: https://github.com/Blu-Eagle/turntable-wifi-esp32
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!