Thingiverse

Rotator Cuff Bracelet Separated

by mrjohn

64 Downloads

48 Likes

1 Makes

While it's cute to Print-In-Place a one plate working model, it's not easy. After personally trying to print this twice and losing 5 hours of print time each, I finally got it right on the third try and another 5 hours.

I've simply taken the medium bracelet size and made four stl files.

This should help those that cannot handle the extreme tolerances of the original.

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Rotator Cuff Bracelet Separated need supports when printing?

Nope — Rotator Cuff Bracelet Separated is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Rotator Cuff Bracelet Separated?

According to the design notes, Rotator Cuff Bracelet Separated takes approximately 5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Rotator Cuff Bracelet Separated available in?

Rotator Cuff Bracelet Separated is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Rotator Cuff Bracelet Separated free to download?

Yes, Rotator Cuff Bracelet Separated is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Rotator Cuff Bracelet Separated

Add to Collection