Thingiverse
Round dice
di ravnikarjan
4
Download
1
Likes
0
Makes
This is a round dice that works just the same as a normal dice. Inside of the ball is an octahedron and a weight.
INSTRUCIONS:
-Print both sides (1, 2),
-For the pin I recommend that you measure diameter and depth of the hole (for the pins), import pin into the slicer and adjust the dimensions (in cura you must disable uniform scaling), keep in mind the tolerances of your printer. You need 4 pins
-For weight print the hollow ball and put some weight inside (I used lead). Then close the opening (I used hot glue). You can put something else inside that will act as a weight.
-Get the pins in the holes and weight inside. Use glue for bonding both sides together.
-Now the dice is complete. You can sand it to hide the joint.
I used PLA but TPU could be better.
INSTRUCIONS:
-Print both sides (1, 2),
-For the pin I recommend that you measure diameter and depth of the hole (for the pins), import pin into the slicer and adjust the dimensions (in cura you must disable uniform scaling), keep in mind the tolerances of your printer. You need 4 pins
-For weight print the hollow ball and put some weight inside (I used lead). Then close the opening (I used hot glue). You can put something else inside that will act as a weight.
-Get the pins in the holes and weight inside. Use glue for bonding both sides together.
-Now the dice is complete. You can sand it to hide the joint.
I used PLA but TPU could be better.
ravnikarjan pubblica anche su
4 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
