Round-Holder - Dovetail SYSTEM

Round-Holder for Dovetail SYSTEM This “Round-Holder” is part of my Dovetail-SYSTEM. You can find it via the following link:→ https://makerworld.com/de/models/1651472-dovetail-system-for-skadis-or-screw-on-rail#profileId-1745991 Everything else is described there. Information about the Round-Holder:This holder can be adapted to fit your tool. You can adjust the inner diameter of the hole. Use the modeler to do so. You can also adjust the collar. The distance can range from 10 to 27 millimeters. The "tolerance" tab is preset to 0.1 mm, which allows enough space for the holder to easily fit into the main rail.→ If you need different tolerances, you can adjust them in the modeler. Increasing the value generates more air. As you can see in the pictures, you may need to use spacers. They must be adjusted depending on the type of holder you design. The spacers go between the holders to prevent them from wobbling or sliding back and forth. You can use my spacer modeler for this task. S