Round Thermometer Hygrometer Stand

圆形温湿度计支架底座，底部限位需要用胶水粘上去；背面传感器位置镂空无遮挡；磁铁可装可不装，留有拆卸孔；磁铁尺寸为8mm，厚度小于3.5mm都可以用；墙建议6层以上，可以卡的紧一些；建议使用PETG； Round temperature and humidity meter support base, the bottom limit needs to be glued on; The back sensor position is hollowed out without blocking; The magnet can be installed or not, leaving a disassembly hole; Magnet size is 8mm, thickness is less than 3.5mm can be used; The wall is recommended to be more than 6 layers, and the card can be tight; PETG is recommended;