Round Trash Can Divider

A divider for round trash cans and bins with a 295mm outer diameter.This trash can divider comes in three sections that can be screwed together for a tight fit on the trash can. There&#39;s a second print profile for a 280mm FNISS as well. Customise: Please read the guide below when customising the model! Print plates:3x Plate 1 (assemble by adding heat set inserts and screwing the ring together)3x Plate 2 (lids to hold the bags in place and to add labels) Measurements:Outer diameter 295mmRim width ~9.25mm Required parts:6x Heat set inserts M5, e.g. from CNCKitchen6x M5x12 screws DIN7991, e.g. from FrantosI printed this in PLA.Let me know if you got a round trash can with different dimensions and want a print profile for it. Boost MeIf you found this model useful, please consider boosting it! How to Customise: You can customise diameter and ring width (pictured on the right). Add clearance to the values you measure!<img src="https://makerworld.bblmw.com/makerworld/model/DSM000000004348