Thingiverse
Rounded Magnetic Earplug Holder
par H4rk3n
0
Téléchargements
0
Likes
0
Makes
Small rounded earplug holder with magnetic snap.
The other holders I could find didn't really appeal to me, so I designed my own.
Model is about 40mm x 40mm x 25mm after assembly, with an internal space of 32mm x 25mm x 25mm.
Magnets used come from a Vaperesso pod and measures 2.5mm x 2mm x 7mm. You'll need 4.
Fastener used is a M3x25 button head cap screw with a M3 nut. Use locktite on the nut otherwise the hinge action will work it loose. Alternatively use a nyloc nut, just remember to adjust the screw length accordingly.
File are for one piece, so print two. I've also included the FreeCAD file for anyone wanting to remix.
The other holders I could find didn't really appeal to me, so I designed my own.
Model is about 40mm x 40mm x 25mm after assembly, with an internal space of 32mm x 25mm x 25mm.
Magnets used come from a Vaperesso pod and measures 2.5mm x 2mm x 7mm. You'll need 4.
Fastener used is a M3x25 button head cap screw with a M3 nut. Use locktite on the nut otherwise the hinge action will work it loose. Alternatively use a nyloc nut, just remember to adjust the screw length accordingly.
File are for one piece, so print two. I've also included the FreeCAD file for anyone wanting to remix.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
