Royal Rangers patch multicolor (hueforge)

Multicolor patch of the Royal Rangers Logo. It uses 5 colors (Blue, Yellow, Red, White and Brown for the shadow of the golden star. Hueforge instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x179.98mm in size. If you scale, only scale x and y, but keep z as-is. You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #ffffff PLA Elegoo Matte White Transmission Distance: 4 #f50a0a PLA Sunlu Red Transmission Distance: 3 #1729ab PLA Sunlu Klein Blue Transmission Distance: 2.1 #eac642 PLA Sunlu Vivid Yellow Transmission Distance: 3 #362111 PLA Sunlu Coffee Brown Transmission Distance: 0.1 This print uses 5 unique filaments Swap Instructions: Start with White At layer #8 (0.72mm) swap to Red At layer #15 (1.28mm) swap to Klein Blue At layer #19 (1.6mm) swap to Vivid Yellow At layer #26 (2.16mm) swap to Coffee Brown for the rest.