Thingiverse
RPi 4 Server Case
von 3DoingIt
61
Downloads
32
Likes
0
Makes
For the OLED mini display mount
click here
A Raspberry pi 4 server case to mount your SSD. Optionally, you can print the fan mount bracket to cool down your system. Based on TerraPi Alpha model.
This costume case needs extra standoffs and screws to "connect" the SSD mount bracket with the RPi board.
Firstly, mount the SSD mount bracket with the RPi board using 4 standoffs and 4 screws. Then, tighten the SSD with the SSD mount bracket using 4 screw.
Things to do: include to the existing model an OLED display mount bracket.
UPDATE:
Now the model includes two new legs which are exactly the same as the original but a bit higher (10mm instead of 3mm) so that the air can flow easily between the SSD and the surface.
click here
A Raspberry pi 4 server case to mount your SSD. Optionally, you can print the fan mount bracket to cool down your system. Based on TerraPi Alpha model.
This costume case needs extra standoffs and screws to "connect" the SSD mount bracket with the RPi board.
Firstly, mount the SSD mount bracket with the RPi board using 4 standoffs and 4 screws. Then, tighten the SSD with the SSD mount bracket using 4 screw.
Things to do: include to the existing model an OLED display mount bracket.
UPDATE:
Now the model includes two new legs which are exactly the same as the original but a bit higher (10mm instead of 3mm) so that the air can flow easily between the SSD and the surface.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
