Thingiverse
RPi Project Box
door fhogphil
5
Downloads
4
Likes
0
Makes
Added some LEDs that needed more power that RPi could provide. Needed to add a level board, 5V power and wiring for the LEDs.
Decided to make a case for it all. This is all self contained. The 5V adapter, and a 4PIN JST connector are press fit into place. A clip holds the RPi securely in place. The fan is bolted on with M2x8 machine bolts.
If you are looking at my wiring:
YELLOW: data from GPIO10
BLACK: ground
RED: 5V
GREEN: 3.3V
I am powered via POE and a splitter, on the LAN.
Decided to make a case for it all. This is all self contained. The 5V adapter, and a 4PIN JST connector are press fit into place. A clip holds the RPi securely in place. The fan is bolted on with M2x8 machine bolts.
If you are looking at my wiring:
YELLOW: data from GPIO10
BLACK: ground
RED: 5V
GREEN: 3.3V
I am powered via POE and a splitter, on the LAN.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
