Thingiverse
RPi Server case
by blokkendoos
7
Downloads
4
Likes
0
Makes
A casing for a RPi server
**Components**
Raspberry Pi 3B
[Adafruit 1.3" OLED Display] (https://www.adafruit.com/product/938)
PCB for shutdown/reboot/run button ["RPi Schakelaar" Eagle files] (https://www.raspberrypi.org/forums/viewtopic.php?t=48455&p=379280)
perspex/plexiglass screen (for the OLED display)
The design was made with [FreeCAD] (http://www.freecadweb.org)
**Workflow automation**
Make is used here to automate the STL export and gcode generation workflow. Attached are the makefile and FreeCAD python script used. You will have to adjust these to your configuration. E.g. the paths used pertain to my specific setup.
**Dependencies**
[admesh] (https://github.com/admesh/admesh) for rotating STL files
[slic3r] (http://slic3r.org) for generating the gcode
[2019-09-27] Changed sys info from bars to pies, showing RAM, SD card, and CPU usage.
**Components**
Raspberry Pi 3B
[Adafruit 1.3" OLED Display] (https://www.adafruit.com/product/938)
PCB for shutdown/reboot/run button ["RPi Schakelaar" Eagle files] (https://www.raspberrypi.org/forums/viewtopic.php?t=48455&p=379280)
perspex/plexiglass screen (for the OLED display)
The design was made with [FreeCAD] (http://www.freecadweb.org)
**Workflow automation**
Make is used here to automate the STL export and gcode generation workflow. Attached are the makefile and FreeCAD python script used. You will have to adjust these to your configuration. E.g. the paths used pertain to my specific setup.
**Dependencies**
[admesh] (https://github.com/admesh/admesh) for rotating STL files
[slic3r] (http://slic3r.org) for generating the gcode
[2019-09-27] Changed sys info from bars to pies, showing RAM, SD card, and CPU usage.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
