ruffy one piece

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA sublu Black Transmission Distance: 0.3 PLA sunlu Gray Transmission Distance: 3 PLA sunlu White Transmission Distance: 5 PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ esun Red Transmission Distance: 6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #11 (0.96mm) swap to White At layer #15 (1.28mm) swap to BlackBorder Only Colors from here until the end. At layer #16 (1.36mm) swap to Red for the rest.