Ruima 4 Mini pro mudguard

This is a mudguard for the **Speedway**/**Ruima mini 4 pro** electric scooter (or any other scooter with the same rear fork)

**Designed for use with *200 x 50 mm* tires**. The tail's inner wall is 60mm wide and there's about 5mm of separation between the mudguard and the wheel's top.

You probably want to print it with the wide flat side laying on the bed (as it is by default) or you might get some gnarly strings on the mudguard's roof depending on how your printer deals with overhangs. Use supports.