Thingiverse
Ruixin Pro Sharpener - Upgrades
by leadingedge
94
Downloads
63
Likes
0
Makes
This is a Scissors, Chisel, Magnetic Large blade, Small blade and other tool sharpening attachment for the Ruixin Pro Sharpening system (Metal Version). It is combined with a flat ground knife magnetic table and 3-position guide system with numerous attachments. See pictures.
I also have 2 versions of my Fine Tuning adapters. One is for a 7mm vertical rod, and one is for a 8mm vertical rod. This allows you to sharpen and adjust your angle with micro adjustment for that perfect edge.
I highly recommend a strip of rubberized tape (I use ISC Racers Tape) for the insides of the clamps for a very secure grip.
Scissors Clamp - Use M4 brass threaded melt-in inserts for the 2 holes in the platform side of scissors clamp, and 1 x M4 brass threaded melt-in insert into the larger bottom hole of the scissors clamp. 3 x M4 screws of the correct length are also needed. See Photos.
Also use a brass insert in the small centre hole of the table platform, and use 3 Neodymium magnets forced a
I also have 2 versions of my Fine Tuning adapters. One is for a 7mm vertical rod, and one is for a 8mm vertical rod. This allows you to sharpen and adjust your angle with micro adjustment for that perfect edge.
I highly recommend a strip of rubberized tape (I use ISC Racers Tape) for the insides of the clamps for a very secure grip.
Scissors Clamp - Use M4 brass threaded melt-in inserts for the 2 holes in the platform side of scissors clamp, and 1 x M4 brass threaded melt-in insert into the larger bottom hole of the scissors clamp. 3 x M4 screws of the correct length are also needed. See Photos.
Also use a brass insert in the small centre hole of the table platform, and use 3 Neodymium magnets forced a
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
