RunCam 5 generic quadcopter mount
par Sarge3550
24
Téléchargements
25
Likes
0
Makes
A generic mount for RunCam 5 for quadcopter. Some info:
* The large main part should be printet in a rubber like material, like TPU (do not use the most squishy types).
* The uptilt angle is about 25 degrees.
* The tilt part should be made in a rigid, tough material for a more rigid positioning.
* The camera is held in place with a cable tie in the back.
* It can be mounted to the frame using straps or strips.
* All functions are accessible when the camera is mounted.
* Probably won't work with top mountet LiPo.
* The large main part should be printet in a rubber like material, like TPU (do not use the most squishy types).
* The uptilt angle is about 25 degrees.
* The tilt part should be made in a rigid, tough material for a more rigid positioning.
* The camera is held in place with a cable tie in the back.
* It can be mounted to the frame using straps or strips.
* All functions are accessible when the camera is mounted.
* Probably won't work with top mountet LiPo.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
