RunCam Split Spherical Mount

I designed this to have something that is a bit aerodynamic camera mount.
It's a but bulky at the moment, and you'll need to print it with 10% infill to make it lighter.

My print density is .1mm and my infill is about 50%. Total weight of the camera mount with camera onboard is 326grams. Heavy!!! Let me know on the comment what a .2mm output is.

This design has no provision for opening the memory card, so you'll have to get the videos via the wifi network. :)

Parts List
=======

4 x (plastic cable tie) - to secure the camera board.
5 x (m1x6 screw) - to secure left sphere cover
4 x (m1x6 screw) - to secure right sphere cover
3 x (m4x20 screw) - to secure the tilt cylinder inside the sphere
8 x (m1x6 screw) - to secure the circular servo arm on to the gears
1 x (m3x20 nut and screw) - to secure the transmission gear
1 x(m3x16 nut and screw) - to secure the tilt cylinder and left sphere cover
1 x (60 degrees micro servo, circular arm, and screw) - for tilt
1 x (180 d