Thingiverse
Models
Ver Modelo
Running Bond Tile Patterns (Roller & Stamp)
1.6k
Descargas
962
Likes
3
Makes
This roller aims to create the tile pattern shown in the image on XPS foam or a similar material, using 2mm edges to cut a groove. It should be good for brickwork on buildings or stone paths.
The roller itself is just over 6 inches. The tile pattern is provided as a reference of what the roller should create.
Update 27/10/18;
The two marked NarrowCut have 1mm edges to cut grooves. Although it has finer edges to cut, it may not last as long.
The other two have 2mm edges like the Flagstone roller (https://www.thingiverse.com/thing:3178751 )
Updated 02/12/21: Fixed the normals
* Tile Rollers-RunningBond_Roller_211202.stl
The roller itself is just over 6 inches. The tile pattern is provided as a reference of what the roller should create.
Update 27/10/18;
The two marked NarrowCut have 1mm edges to cut grooves. Although it has finer edges to cut, it may not last as long.
The other two have 2mm edges like the Flagstone roller (https://www.thingiverse.com/thing:3178751 )
Updated 02/12/21: Fixed the normals
* Tile Rollers-RunningBond_Roller_211202.stl
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
