MakerWorld
Hueforge & Lithophane
Zum Modell
Running Cheetah HueForge
9
Downloads
6
Likes
3
Makes
Project: cheetah grayscale stl.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 140x140mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA PolyLite Grey Transmission Distance: 1 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Ash Gray At layer #8 (0.72mm) swap to Grey At layer #9 (0.8mm) swap to White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
