Ryobi 18V String Trimmer - Bladed Head

**WARNING: BITS OF BRITTLE PLASTIC MOVING AT HIGH SPEEDS IS NOT SAFE
This model is provided AS-IS and you use this at your own risk. **

**As of 11/8/17 this model will not work as is in PLA or PETG as the tabs will snap upon insertion attempt. **

**What this is:**
A MOSTLY UNTESTED dual bladed attachment for the Ryobi 18V line of string trimmers. This should fit the same number of models the official dual bladed attachment fits but in my experience will NOT fit the 18v brushless nor the 40v system.

**How to use it:**
Print at 75% infill or higher. I printed it with PLA because it's cheap and easy and I wanted to see how well it'd perform. Anneal it if you like, however I have no idea how that will turn out in terms of shrinking/warping dimensions! You might have to leave the supports on the model if you go this route.

Use M6 or M7 bolts and nuts to fasten the blades to the head. If you go with M7, you may need to increase the size of the blades to accommodate the large