Thingiverse
Ryobi Link Dividers
par RegularGuyTy
53
Téléchargements
63
Likes
0
Makes
Ryobi doesn't make dividers for their Link line for some reason, so I made some.
As my printer wasn't large enough to print the full depth or width I made a center post to fit the dividers into. It needs at least 2 opposing pieces, but does NOT need 3 nor 4 pieces to be steady.
NOTE: The dividers, center post, and side cutouts all taper. It is important to respect the taper angle and install the dividers and center post in the correct orientation.
The file names indicate the overall length of the dividers, so you can see if they will fit your printers.
Other than infill as you desire I only recommend a brim so that the walls don't topple
As my printer wasn't large enough to print the full depth or width I made a center post to fit the dividers into. It needs at least 2 opposing pieces, but does NOT need 3 nor 4 pieces to be steady.
NOTE: The dividers, center post, and side cutouts all taper. It is important to respect the taper angle and install the dividers and center post in the correct orientation.
The file names indicate the overall length of the dividers, so you can see if they will fit your printers.
Other than infill as you desire I only recommend a brim so that the walls don't topple
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !