Ryuk - HueForge Print

Death Note fans, this one&#39;s for you! (but mainly, for my bro-in-law who requested it).Pretty simple print at 0.08mm layer heights that takes just under 3 hours to print (if you use my 3MF Settings). If you do not use my 3MF settings (or if you do not use a Bambu Printer/Bambu Studio) - please follow the instructions below. If you wish to resize the print please DO NOT resize the Z dimension and only resize the X and Y dimensions. Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 134.49x240mm in size You may print at higher layer heights below the Min Depth of 0.44mm The Max Depth is 2mm and the Actual Depth is 2.1mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA Chrominal Penumbra Gray Transmission Distance: 6.9<span style="background-color: rgb(255,255,255); color: rgb(44,44,46); font-size: 1