Thingiverse
Saab 99
di Mikatron
5
Download
12
Likes
0
Makes
28mm miniature scale.
This was an old school project of mine which I decided to spruce up a bit and make printable. Most of it is based on the SAAB 99 '72 model.
I've made two versions, one with roof rails and one without. The rails are about as small as they can get and some slicers and printers might have trouble with them. Check your slicer preview to make sure they look alright first.
The car was made for printing on FDM-printers (thus being split in two halves) but I've included an STL with the complete car body intact as well. If you do decide to print the complete version on an FDM-printer I would probably advice to use supports along the entire bottom.
Test printed at 0.15mm layer height.
It will need supports under the door mirrors. I printed mine with supports for the wheel wells too but this might not be required.
I've included 3MF-files (pre-supported and unsupported).
Requires 2-4 standard OpenLOCK-clips available here: printablescenery.com/product/openlock-clips
*Us
This was an old school project of mine which I decided to spruce up a bit and make printable. Most of it is based on the SAAB 99 '72 model.
I've made two versions, one with roof rails and one without. The rails are about as small as they can get and some slicers and printers might have trouble with them. Check your slicer preview to make sure they look alright first.
The car was made for printing on FDM-printers (thus being split in two halves) but I've included an STL with the complete car body intact as well. If you do decide to print the complete version on an FDM-printer I would probably advice to use supports along the entire bottom.
Test printed at 0.15mm layer height.
It will need supports under the door mirrors. I printed mine with supports for the wheel wells too but this might not be required.
I've included 3MF-files (pre-supported and unsupported).
Requires 2-4 standard OpenLOCK-clips available here: printablescenery.com/product/openlock-clips
*Us
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
