Slicer Discord
Safety Pin adapter – 3D-Druckmodell von MakerWorld MakerWorld
Clothes

Safety Pin adapter

von Ogma · Clothes
154 Downloads
34 Likes
78 Makes
Zum Modell
This little piece lets you attach almost anything to your clothes.Please find in the file the 4 sizes, each size its plate. Simply glue the right-sized mount to the object you want to wear, slide a safety pin through the tube and you’re good to go!Comes in four versions to fit different pin sizes:Thin Short Mount => (w)05mm x (l)10 mm × 1.5 mm, Ø 0.75 mm)Thin Long Mount => (w)05mm x (l)15 mm × 1.5 mm(h), Ø 0.75 mm)Thick Short Mount => (w)10mm x (l)10 mm × 2.5 mm(h), Ø 0.75 mm)Thick Long Mount => (w)10mm x (l)15 mm × 2.5 mm(h), Ø 0.75 mm)Added a parametric model, a clean and simple parametric base and tube adapter for safety pins, built to be easy to tweak, print, and use.You can adjust the tube length, inner diameter, thickness, and how deep it sits inside the plate.The plate size and thickness can also be changed, so the part scales naturally for different pin sizes or mounting setups.Alignment should stay perfect whatever values you pick.Limitation will be the size of your nozzle; I
Kategorie
Clothes
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
sehr großer Druck
Einteilig Skalierung/Teilung evtl. nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 3/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
300 mm (Sehr groß)
Nachbearbeitung
Kleben
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen